Sony DCR-TRV70 - Manual (Page 46)

46
Insert a “Memory Stick” into your camcorder beforehand.
During tape recording standby
The POWER switch should be set to .
(1) Keep pressing PHOTO lightly until a still image appears. The CAPTURE
indicator appears. Recording does not start yet. To change the still image,
release PHOTO, select a still image again, and then press and hold PHOTO
lightly.
(2) Press PHOTO deeply.
Recording is complete when the bar scroll indicator disappears.
The image displayed on the screen when you press PHOTO deeply is recorded
in the currently displayed folder (p. 129) in the “Memory Stick.”
During tape recording
The POWER switch should be set to .
Press PHOTO deeply.
The image displayed on the screen when you press PHOTO deeply is recorded on the
“Memory Stick.”
Recording on the “Memory Stick” is complete when the bar scroll indicator disappears.
— Advanced Recording Operations —
Recording still images on a “Memory Stick”
during tape recording standby or tape recording
1
2
12
CAPTURE
FINE
640
FINE
640
1 0 1
1 0 1
PHOTO
PHOTO