Sony DCR-TRV70 User Manual

Page 195

Advertising
background image

195

Additional Information

Audio mode

12-bit mode: The original sound can be recorded in stereo 1, and the new sound in

stereo 2 in 32 kHz. The balance between stereo 1 and stereo 2 can be
adjusted by selecting AUDIO MIX in the menu settings during playback.
Both sounds can be played back.

16-bit mode: A new sound cannot be recorded but the original sound can be recorded in

high quality. Moreover, your camcorder can also play back sound recorded
in 32 kHz, 44.1 kHz or 48 kHz. When playing back the tape recorded in the
16-bit mode, the 16BIT indicator appears on the screen.

When you play back a dual sound track tape

When you play back a dual sound track tape recorded in a stereo system, set HiFi
SOUND in

to a desired mode in the menu settings (p. 175).

Sound from speaker

HiFi Sound Mode

Playing back the stereo tape

Playing back the dual
sound track tape

STEREO

Stereo

Main sound and sub sound

1

Lch

Main sound

2

Rch

Sub sound

You cannot record dual sound programs on your camcorder.

Notes on the cassette

To prevent accidental erasure

Slide the write-protect tab on the cassette to SAVE

>.

When affixing a label on the cassette

Be sure to affix a label only on the locations as illustrated below [a] so as not to cause
malfunction of your camcorder.

After using the cassette

Rewind the tape to the beginning, put the cassette in its case, and store it in an upright
position.

Usable cassettes

[a]

Do not affix a label along this
border.

Advertising