Sony DCR-TRV70 - Manual (Page 92)

92
To change the insert end point
Press ZERO SET MEMORY on the Remote Commander again after Step 4 to erase the
ZERO SET MEMORY indicator and begin from Step 2.
Using the Remote Commander
In Step 4, press z REC and MARK simultaneously, then immediately press X. In Step
5, press X at the scene where you want to start recording from.
To insert a scene without setting the insert end point
Skip Step 2 and 3. Press x on the Remote Commander or
on your camcorder
when you want to stop inserting.
Inserting a scene from a VCR – Insert editing
3
ZERO SET
MEMORY
0:00:00
ZERO SET
MEMORY