Sony DCR-TRV70 - Manual (Page 192)

192
Warning indicators
101-0001 Warning indicator pertaining to
files
Slow flashing:
• The file is corrupted.
• The file is unreadable.
• You are trying to carry out MEMORY MIX
on a moving picture (p. 118).
C:21:00 Self-diagnosis display (p. 191)
E The battery pack is dead or nearly dead
Slow flashing:
• The battery pack is nearly dead.
Depending on the operating conditions,
environmental or battery conditions, the E
indicator may flash, even if there are
approximately five to 10 minutes
remaining.
% Moisture condensation has occurred *
Fast flashing:
• Eject the cassette, set the POWER switch to
OFF (CHG), and leave it for about one hour
with the cassette lid open (p. 202).
Warning indicator pertaining to
Cassette Memory *
Slow flashing:
• No cassette with Cassette Memory is
inserted (p. 194).
Warning indicator pertaining to the
“Memory Stick”
Slow flashing:
• No “Memory Stick” is inserted.
Fast flashing:
• The image cannot be recorded on the
“Memory Stick.”*
Warning indicator pertaining to the
“Memory Stick” formatting*
Fast flashing:
• The “Memory Stick” data is corrupted
(p. 102).
• The “Memory Stick” is not formatted
correctly (p. 177).
If indicators appear on the screen, check the following:
See the page in parentheses “( )” for details.
Warning indicator pertaining to
incompatible “Memory Stick”*
Slow flashing:
•An incompatible “Memory Stick” is
inserted.
Q Warning indicator pertaining to the
tape
Slow flashing:
• The tape is near the end.
• No cassette is inserted.*
• The write-protect tab of the cassette is set to
SAVE > (p. 195).*
Fast flashing:
• The tape has run out.*
Z You need to eject the cassette*
Slow flashing:
• The write-protect tab on the cassette is set
to SAVE > (p. 195).
Fast flashing:
• Moisture condensation has occurred
(p. 202).
• The tape has run out.
• The self-diagnosis display code is displayed
(p. 191).
- The image is protected*
Slow flashing:
• The image is protected (p. 137).
Warning indicator pertaining to the flash
Slow flashing:
• During charging
Fast flashing:
• The self-diagnosis display code is displayed
(p. 191).*
• There is something wrong with the built-in
flash or the external flash (optional).
Warning indicator pertaining to still
image recording
Slow flashing:
• The still image cannot be recorded on the
“Memory Stick” in the current operating
conditions (p. 47).
* You hear the melody or beep sound.