Sony DCR-TRV70 - Manual (Page 57)

57
Advanced Recording Operations
The POWER switch should be set to .
Operate by touching the panel.
(1) Press FN and select PAGE2.
(2) Press DIG EFFT. The screen to select a digital effect is displayed.
(3) Press a desired mode. When you select STILL or LUMI., the still image when
you have selected the mode is stored in memory.
(4) Press – (to decrease the effect)/+ (to increase the effect) to adjust the effect.
Items to adjust
SLOW SHTR Shutter speed. The larger the shutter speed number, the slower the
shutter speed.
STILL The rate of the still image you want to superimpose on the moving
picture
OLD MOVIE No adjustment necessary
FLASH The interval of frame by frame playback
LUMI. The color scheme of the area in the still image which is to be swapped
with a moving picture
TRAIL The vanishing time of the incidental image
(5) Press OK to return to PAGE2.
To return to FN
Press EXIT.
To cancel digital effect
Press OFF on the DIG EFFT screen to return to PAGE2.
Using special effects – Digital effect
[a] The bar appears when setting the following digital
effect modes: STILL, FLASH, LUMI., TRAIL.
2 4
LUMI. – +
OK OFF
DIG
EFFT
DIG EFFT DIG EFFT
STILL
SLOW
SHTR
OLD
MOVIE
OFF OK
LUMI. FLASH TRAIL
[a]