Sony DCR-TRV70 - Manual (Page 179)

179
Customizing Your Camcorder
Icon/item
TAPE SET
REC MODE
AUDIO MODE
q REMAIN
FRAME REC
INT. REC
Mode
z SP
LP
z 12BIT
16BIT
z AUTO
ON
z OFF
ON
ON
z OFF
SET
Meaning
To record in the SP (Standard Play) mode
To increase the recording time to 1.5 times the SP
mode
To record in the 12-bit mode (two stereo sounds)
To record in the 16-bit mode (the one stereo sound
with high quality)
To display the remaining tape indicator:
• For about eight seconds after the POWER
switch is set to VCR or CAMERA with the
cassette inserted, and your camcorder calculates
the remaining amount of tape
• For about eight seconds after the POWER
switch is set to VCR and is pressed
To always display the remaining tape indicator
To deactivate frame recording
To activate frame recording (p. 67)
To activate Interval Recording (p. 66)
To deactivate Interval Recording
To set INTERVAL and REC TIME for Interval
Recording
POWER
switch
Notes on the LP mode
•When you record the tape in the LP mode on your camcorder, we recommend playing
back the tape on your camcorder. When you play back the tape on other camcorders
or VCRs, mosaic noise may occur in pictures or sound.
•When you record in the LP mode, we recommend using a Sony Excellence/Master
mini DV cassette so that you can get the most out of your camcorder.
•You cannot make audio dubbing on the tape recorded in the LP mode. Use the SP
mode for the tape to be audio dubbed.
•When you mix recordings in the SP mode and in the LP mode on one tape, the
playback picture may be distorted or the time code may not be written properly
between scenes.
Notes on AUDIO MODE
•You cannot dub audio sound on the tape recorded in the 16-bit mode.
•When playing back the tape recorded in the 16-bit mode, you cannot adjust the
balance in AUDIO MIX.
Changing the menu settings
(continued on the following page)