Sony DCR-TRV70 - Manual (Page 23)

23
Getting Started
Your camcorder has operation buttons on the LCD screen.
Touch the LCD screen directly with your finger or the supplied stylus (DCR-TRV70
only) to operate each function.
(1) Set the POWER switch to CAMERA to record, VCR to play back or MEMORY
to use a “Memory Stick.”
(2) Press OPEN to open the LCD panel.
(3) Press FN. Operation buttons on PAGE1 are displayed on the LCD screen.
(4) Press PAGE2/PAGE3 to display PAGE2/PAGE3. Operation buttons on
PAGE2/PAGE3 are displayed on the LCD screen.
(5) Press a desired operation item. See relevant pages of this manual for each
function.
To return to FN
Press EXIT.
To execute settings
Press OK. The display returns to PAGE1/PAGE2/PAGE3.
To cancel settings
Press OFF. The display returns to PAGE1/PAGE2/PAGE3.
To make screen indicators disappear
Press DISPLAY/BATT INFO.
Step 3 Using the touch panel
2
1
3
SPOT
METER
MENU
SPOT
FOCUS
FADER END
SCH EXPO-
SURE
PAGE1 PAGE2 PAGE3 EXIT
When the POWER switch
is set to CAMERA
DISPLAY/BATT
INFO