Sony DCR-TRV70 - Manual (Page 189)

189
Troubleshooting
Others
Symptom Cause and/or Corrective Actions
• The cassette has no Cassette Memory.
c Use a cassette with Cassette Memory (p. 97).
• The Cassette Memory is full.
c Erase unnecessary titles (p. 98).
• The cassette is set to prevent accidental erasure.
c Slide the write-protect tab to REC . (p. 195).
• The tape has a blank portion between recorded portions.
c Superimpose the title to the recorded position (p. 97).
•The cassette is set to prevent accidental erasure.
c Slide the write-protect tab to REC . (p. 195).
• The cassette has no Cassette Memory.
c Use a cassette with Cassette Memory (p. 100).
• The Cassette Memory is full.
c Erase unwanted data (p. 100).
• The tape is set to prevent accidental erasure.
c Slide the write-protect tab to REC . (p. 195).
• The input selector on the VCR is not set correctly.
c Set the selector correctly, then check the connection
between the VCR and your camcorder (p. 81).
• Your camcorder is connected to the DV equipment of
other than Sony using the i.LINK cable.
c Set it to IR (p. 81).
• Setting a program on a blank portion of the tape is
attempted.
c Set the program again on a recorded portion (p. 87).
• The synchronization of your camcorder and the VCR is
not adjusted.
c Adjust the synchronization of the VCR (p. 84).
• The IR SETUP code is not correct.
c Set the correct code (p. 83).
• Setting a program on a blank portion of the tape is
attempted.
c Set the program again on a recorded portion (p. 127).
• COMMANDER in is set to OFF in the menu settings.
c Set it to ON (p. 181).
• Something is blocking the infrared rays.
c Remove the obstacle.
• The batteries are inserted in the battery holder with the + –
polarities incorrectly matching the + – marks.
c Insert the batteries with the correct polarity (p. 216).
• The batteries are dead.
c Insert new ones (p. 216).
• DISPLAY is set to V-OUT/LCD in in the menu
settings.
c Set it to LCD (p. 181).
A title is not recorded.
The title cannot be deleted.
A cassette label is not recorded.
Digital program editing on the tape
does not function.
Digital program editing on the
“Memory Stick” does not function.
The Remote Commander supplied
with your camcorder does not work.
The picture from a TV or VCR does
not appear even when your
camcorder is connected to the
outputs on the TV or VCR.
Types of trouble and how to correct trouble
(continued on the following page)