Sony DCR-TRV70 - Manual (Page 119)

119
“Memory Stick” Operations
2
4
MEM
M I X
101–0001
+ –
MEM MIX
M C CAM
LUMI
OVER–
LAP
OFF OK
M C CAM
CHROM
CAM C M
CHROM
M. LUMI
101–0001
+ –
MEM MIX
OFF OK
+ –
1 0 1
1 0 1
Still image
Notes
•You cannot use MEMORY MIX for moving pictures recorded on a “Memory Stick.”
•When the overlapping still image has a large amount of white, the thumbnail image of
the picture may not be clear.
•When you use MEMORY MIX in the mirror mode (p. 29), the picture on the LCD
screen appears normally without being mirror-reversed.
Image data modified with your computer
You may not be able to play back the images modified with your computer on your
camcorder.
The “Memory Stick” supplied with your camcorder stores 20 images:
– For M. CHROM: 18 images (such as a frame) 101-0001~101-0018
– For C. CHROM: two images (such as a background) 101-0019~101-0020
Sample images
Sample images stored in the “Memory Stick” supplied with your camcorder are
protected (p. 137).
Recording a superimposed image on a tape
Before operation
•Insert the “Memory Stick” containing still images into your camcorder.
•Insert a tape for recording into your camcorder.
The POWER switch should be set to .
Operate by touching the panel.
(1) Press FN and select PAGE2.
(2) Press MEM MIX. The image recorded on the “Memory Stick” appears on the
right lower part of the screen.
(3) Press – (to see the previous image)/+ (to see the next image) on the right lower
corner of the screen to select the still image that you want to superimpose.
(4) Press a desired mode. The still image is superimposed on the moving picture
during recording standby.
Superimposing a still image in the “Memory Stick” on an image
– MEMORY MIX
(continued on the following page)