Sony DCR-TRV70 - Manual (Page 125)

125
“Memory Stick” Operations
Recording a picture from a tape as a
moving picture
Your camcorder can read moving picture data recorded on a tape and record it as a
moving picture on a “Memory Stick.”
Before operation
Insert the recorded tape and a “Memory Stick” into your camcorder.
The POWER switch should be set to .
Operate by touching the panel.
(1) Press . The picture recorded on the tape is played back.
(2) Press again to pause playback at the scene where you want to start
recording from.
(3) Press START/STOP. Images and sound are recorded on the “Memory Stick.”
For details on recording time, see page 108.
To stop recording
Press START/STOP.
Notes
•Sound recorded in 48 kHz is converted to 32 kHz sound when recording images from
a tape to a “Memory Stick.”
•Sound recorded in stereo is converted to monaural sound when recording from a tape.
Titles recorded on the tape
You cannot record the titles.
If the “ AUDIO ERROR” indicator appears
Sound that cannot be recorded by your camcorder has been recorded. Connect the A/V
connecting cable to input images from the external equipment used to play back the
image (p. 89).
Data Codes recorded on the tape
Data Codes recorded on the tape cannot be recorded on the “Memory Stick.”
The date/time when it is recorded on the “Memory Stick” is recorded. Various settings
are not recorded.
[a] Available recording time on the “Memory Stick”
[b] This indicator is displayed for about five seconds after pressing START/STOP. This
indicator is not recorded.
[c] Number of the folder currently used for recording
3
320
50min
REC
BBB
N
1,2
15sec
0:00:03
0:15:42:43
[b]
[a]
[c]
1 0 1