Sony DCR-TRV70 - Manual (Page 127)

127
“Memory Stick” Operations
You can duplicate selected scenes (programs) for editing onto a “Memory Stick.”
Making a program
The POWER switch should be set to .
Operate by touching the panel.
(1) Insert the tape for playback, and a “Memory Stick” for recording into your
camcorder.
(2) Press FN to display PAGE1.
(3) Press MENU.
(4) Select VIDEO EDIT in
, then press EXEC.
(5) Select MEMORY, then press EXEC.
(6) Repeat pressing IMAGESIZE to select a desired size. The image size changes
each time you press IMAGESIZE.
(7) Follow Step 6 to 10 on page 86.
To finish making a program
Press END.
The program is stored in memory until the tape is ejected.
Notes
•You cannot dub the titles, display indicators or the contents of Cassette Memory.
•You cannot operate recording during Digital program editing on the “Memory Stick.”
On a blank portion of the tape
You cannot set IN or OUT.
If there is a blank portion between the IN point and the OUT point on the tape
The total time may not be displayed correctly.
While making a program
If you eject the cassette, the NOT READY indicator appears on the screen. The program
will be erased.
Erasing the program you have set
See “Erasing the program you have set” on page 87.
Erasing all programs
(1) Press FN to display PAGE1.
(2) Press MENU.
(3) Select VIDEO EDIT in
, then press EXEC.
(4) Select MEMORY, then press EXEC.
(5) Follow Step 2 to 4 on page 87.
Recording edited pictures from a tape as
a moving picture – Digital program
editing (on a “Memory Stick”)
4 5
OTHERS
DATA CODE
BEEP
COMMANDER
DISPLAY
V I DEO ED I T
EXIT
RET. EXEC
0:32:30:14
TOTAL
SCENE 0:00:00
0
V I DEO ED I T
MARK
I N START IMAGE
SIZE
UNDO
END
RETURN
TAPE
MEMORY
320 15sec