Sony DCR-TRV70 - Manual (Page 159)

159
Viewing images with your computer
Viewing pictures recorded on the tape on a computer
– USB Streaming (For Windows users)
Notes
•When you view images on a computer with the USB connection, the following may
occur. This is not a malfunction.
– The image shakes up and down.
– Some images are not displayed correctly due to noise, etc.
– Some images are displayed with the cracking noise.
– Images of different color systems to that of your camcorder are not displayed
correctly.
•When your camcorder is in standby with a cassette inserted, it turns off automatically
after five minutes.
•We recommend setting DEMO MODE to OFF in the menu settings when your
camcorder is in standby, and no cassette is inserted.
•Indicators on the screen of your camcorder do not appear on images that are captured
into the computer.
•If you capture a fast moving picture, the picture in the monitor window may not move
smoothly. You can make the picture move more smoothly by adjusting the slider
located just under the right bottom of the monitor window, although this reduces the
picture quality.
•You cannot carry out any “Memory Stick” operations during the USB streaming.
If image data cannot be transferred by the USB connection
The USB driver has been registered incorrectly as the computer was connected to your
camcorder before installation of the USB driver was complete. Reinstall the USB driver
following the procedure on page 153.
If any trouble occurs
Close all running applications, then restart the computer.
Carry out the following operations after quitting the application:
– Disconnect the USB cable.
– Turn the POWER switch to another position on your camcorder.