Sony DCR-TRV70 - Manual (Page 35)

35
Recording – Basics
Using Super NightShot
Super NightShot makes subjects more than 16 times brighter than those recorded using
NightShot.
(1) Set the POWER switch to CAMERA.
(2) Slide NIGHTSHOT to ON.
The and ”NIGHTSHOT” indicators flash on the screen.
(3) Press FN and select PAGE3.
(4) Press SUPER NS.
The indicator lights up on the screen.
(5) Press EXIT to return to FN.
To cancel Super NightShot
Press SUPER NS again to make the indicator disappear. To cancel NightShot, slide
NIGHTSHOT to OFF.
Using the NightShot Light
The picture will be clearer with the NightShot Light on. To enable the NightShot Light,
set N.S. LIGHT in
to ON in the menu settings. (The default setting is ON.)
Using Color Slow Shutter
Color Slow Shutter enables you to record color images in a dim place.
(1) Set the POWER switch to CAMERA.
(2) Slide NIGHTSHOT to OFF.
(3) Press FN and select PAGE3.
(4) Press COLOR SLW S.
The indicator lights up on the screen.
To cancel Color Slow Shutter
Press COLOR SLW S again to make the
indicator disappear.
Notes
•Do not use NightShot in bright places (e.g. the outdoors in the daytime). This may
cause a malfunction.
•While recording using the NightShot Light, attaching the lens hood may block the
NightShot Light. Remove the lens hood when you use the NightShot Light.
•If focusing is difficult while recording using NightShot, focus manually.
•While recording using the NightShot Light, do not obstruct the Infrared rays
(NightShot Light) emitter with your fingers.
Recording a picture
NIGHTSHOT
ON OFF