Sony DCR-TRV70 - Manual (Page 116)

116
Your camcorder can read moving picture data recorded on a tape and record it as a still
image on a “Memory Stick.”
Image size is automatically set to 640
× 480.
Before operation
Insert a “Memory Stick” and the recorded tape into your camcorder.
The POWER switch should be set to .
Operate by touching the panel.
(1) Press . The picture recorded on the tape is played back.
(2) Keep pressing PHOTO lightly and check the image. The picture from the tape
freezes and the CAPTURE indicator appears on the screen. Recording does not
start yet.
To change the selected image, release PHOTO, select a still image again, and
then press and hold PHOTO lightly.
(3) Press PHOTO deeply. Recording is complete when the bar scroll indicator
disappears. The image displayed on the screen when you press PHOTO deeply
is recorded on the “Memory Stick.”
Sound recorded on the tape
You cannot record audio from the tape.
Title recorded on the tape
You cannot record the titles.
Data codes recorded on the tape
Data Codes recorded on the tape cannot be recorded on the “Memory Stick.” The date/
time when it is recorded on the “Memory Stick” is recorded. Various settings are not
recorded.
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
Recording an image from a tape as a still
image
1
2
3
12
CAPTURE
FINE
640
FINE
640
1 0 1
1 0 1
PHOTO
PHOTO