Sony DCR-TRV70 - Manual (Page 40)

40
To display the screen indicators – Display function
Press DISPLAY/BATT INFO on your camcorder or DISPLAY on the Remote
Commander supplied with your camcorder.
The indicators disappear from the screen.
To make the indicators appear, press DISPLAY/BATT INFO or DISPLAY on the
Remote Commander again.
About date/time and various settings
Your camcorder automatically records not only images on the tape but also the
recording data (date/time or various settings when recorded) (Data code).
Follow the steps below to display the data code using the touch panel or the Remote
Commander.
Using the touch panel
(1) Set the POWER switch to VCR, then play back the tape.
(2) During playback, press FN and select PAGE2.
(3) Press DATA CODE.
(4) Select CAM DATA or DATE DATA, then press
OK.
(5) Press EXIT.
[a] Time code/Tape counter
[b] SteadyShot off
[c] Exposure
[d] White balance
[e] Gain
[f] Shutter speed
[g] Aperture value
Playing back a tape
Date/time Various settings
DISPLAY/
BATT INFO
DATA CODE
DISPLAY
JUL 4 2003
12:05:56 PM
50min 0:00:23:01
AUTO
50min 0:00:23:01
6 0 AWB
F1.8 9 dB
[a]
[b]
[c]
[d]
[e]
[ f ]
[g]