Sony DCR-TRV70 - Manual (Page 126)

126
Recording a moving picture from other equipment
You can use either the A/V connecting cable or i.LINK cable.
Connect the equipment as illustrated on page 89.
When connecting with the A/V connecting cable, set DISPLAY in
to LCD in the
menu settings. (The default setting is LCD.)
The POWER switch should be set to .
(1) Play back the recorded tape on the VCR, or turn the TV on to see a desired
program.
The image from the other equipment is displayed on the LCD screen or in the
viewfinder.
(2) Press START/STOP at the scene where you want to start recording from.
Note
Recording may abort unexpectedly or distorted images may be recorded in the
following cases:
– When there is a blank portion on the tape.
– When recording from the tape repeatedly used for dubbing and the recording state is
poor.
– When the input signal is cut off.
Recording a picture from a tape as a moving picture