RADWAG PS 510.R2.CT Carat Balance - Manual (Page 27)

- 27 -
a) Plugging to mains
Balance can be connected to mains only with a power adapter that
comes standard with the balance. Nominal power supply of the power
adapter (specified on the data plate of the power adapter) should be
compatible to the power from mains.
Plug the balance to mains – the plugging socket is located at the back of
balance housing.
The test of the display unit takes place after connecting to the power (all the
elements and pictograms are backlit for a short time). Next, the name and the
program number appears consequently, the indication will reach ZERO level
(with reading unit depending on the b
alance). During the process of starting the balance, the test of the internal
mass adjustment mechanism occurs (single location and elevation of the
internal mass adjustment).
If the indication is different from zero, please press button.
CAUTION: If the balance is “verified”, automatic adjustment/calibration occurs
right after it has been switched on.
b) Connecting additional equipment
It is inevitable to plug the computer out of the main before connecting additional
equipment or changing it (printer, PC computer, additional display, computer
keypad, etc.).
Connect only the equipment recommended by the balance manufacturer.
When the devices are connected, plug the balance to the main.
5 BASIC FUNCTIONS
•
functions related to measuring units
-
weighing in grams [g],
-
weighing in milligrams [mg] (in balances with d≤0.001g),
-
weighing in kilograms [kg] (in balances with d≥0.01g,
-
weighing in carats [ct],
-
weighing in units from beyond SI (available only in non-verified
instruments
):
[lb], [oz], [ozt], [dwt], [tlh], [tls], [tlt], [tlc], [mom], [gr], [ti], [N], [baht], [tola]
• functions related to working modes
-
counting pieces,
-
checkweighing (control +/-),
-
dosing,