Barco CLM R10+ - Manual (Page 149)

13. Projector control
4. Use the ▲ or ▼ key to select the desired IR receiver and press ENTER to toggle this receiver [on] or [off]. (image 13-33,
image 13-34, image 13-35)
Image 13-33
Image 13-34
Image 13-35
Activation key
1. Use the ▲ or ▼ key to select Activation key and press ENTER.
The Activation key window opens. The first digit is selected.
2. Enter a new value with the digit buttons. The next digit is selected. Or use ◄ or ► key to select another digit.
3. Press ENTER to activate the key. (image 13-36, image 13-37)
Image 13-36
Image 13-37
13.6 DMX
Overview
• DMX address
• DMX universe
• DMX monitor
• DMX mode
• Art-Net Activation
While the local LCD display on the CLM is active (backlight is on), the DMX response time may increase.
13.6.1 DMX address
How to set the DMX address
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select DMX and press ENTER.
4. Use the ▲ or ▼ key to select DMX address and press ENTER.
The edit DMX address window opens.
5. Use the ▲ or ▼ key to select a new value
R59770021 CLM R10+ 11/10/2010 145