Brocade Communications Systems Layer 3 Routing Configuration ICX 6650 User Manual
Page 145
Brocade ICX 6650 Layer 3 Routing Configuration Guide
127
53-1002603-01
Displaying IP configuration information and statistics
received
The number of UDP packets received by the device.
sent
The number of UDP packets sent by the device.
no port
The number of UDP packets dropped because they did not have a valid UDP port number.
input errors
This information is used by Brocade customer support.
TCP statistics
The TCP statistics are derived from RFC 793, “Transmission Control Protocol”.
active opens
The number of TCP connections opened by sending a TCP SYN to another device.
passive opens
The number of TCP connections opened by this device in response to connection requests (TCP
SYNs) received from other devices.
failed attempts
This information is used by Brocade customer support.
active resets
The number of TCP connections this device reset by sending a TCP RESET message to the device
at the other end of the connection.
passive resets
The number of TCP connections this device reset because the device at the other end of the
connection sent a TCP RESET message.
input errors
This information is used by Brocade customer support.
in segments
The number of TCP segments received by the device.
out segments
The number of TCP segments sent by the device.
retransmission
The number of segments that this device retransmitted because the retransmission timer for the
segment had expired before the device at the other end of the connection had acknowledged
receipt of the segment.
RIP statistics
The RIP statistics are derived from RFC 1058, “Routing Information Protocol”.
requests sent
The number of requests this device has sent to another RIP router for all or part of its RIP routing
table.
requests
received
The number of requests this device has received from another RIP router for all or part of this
device RIP routing table.
responses sent The number of responses this device has sent to another RIP router request for all or part of this
device RIP routing table.
responses
received
The number of responses this device has received to requests for all or part of another RIP
router routing table.
unrecognized
This information is used by Brocade customer support.
bad version
The number of RIP packets dropped by the device because the RIP version was either invalid or
is not supported by this device.
bad addr family The number of RIP packets dropped because the value in the Address Family Identifier field of
the packet header was invalid.
bad req format
The number of RIP request packets this router dropped because the format was bad.
bad metrics
This information is used by Brocade customer support.
bad resp
format
The number of responses to RIP request packets dropped because the format was bad.
resp not from
rip port
This information is used by Brocade customer support.
TABLE 22
CLI display of IP traffic statistics – Layer 3 Switch (Continued)
Field
Description