Brocade Communications Systems Layer 3 Routing Configuration ICX 6650 User Manual

Page 280

Advertising
background image

262

Brocade ICX 6650 Layer 3 Routing Configuration Guide

53-1002603-01

Displaying OSPF V3 Information

This display shows the following information.

For example, to display detailed information about Ethernet interface 2, enter the show ipv6 ospf
interface ethernet command at any level of the CLI.

TABLE 46

Summary of OSPF V3 interface information

Field

Description

Interface

The interface type, and the port number or number of the interface.

OSPF

The state of OSPF V3 on the interface. Possible states include the following:

Enabled.

Disabled.

Status

The status of the link. Possible status include the following:

Up.

Down.

State

The state of the interface. Possible states includes the following:

DR – The interface is functioning as the Designated Router for OSPF V3.

BDR – The interface is functioning as the Backup Designated Router for OSPF V3.

Loopback – The interface is functioning as a loopback interface.

P2P – The interface is functioning as a point-to-point interface.

Passive – The interface is up but it does not take part in forming an adjacency.

Waiting – The interface is trying to determine the identity of the BDR for the network.

None – The interface does not take part in the OSPF interface state machine.

Down – The interface is unusable. No protocol traffic can be sent or received on such a
interface.

DR other – The interface is a broadcast or NBMA network on which another router is
selected to be the DR.

Area

The OSPF area to which the interface belongs.

Brocade#show ipv6 ospf interface ethernet 1/1/3

ethe 1/1/3 is up, type BROADCAST

IPv6 Address:

2001:db8:46a::1/64

2001:db8::106/64

Instance ID 0, Router ID 192.168.223.223

Area ID 0, Cost 1

State DR, Transmit Delay 1 sec, Priority 1

Timer intervals :

Hello 10, Dead 40, Retransmit 5

DR:192.168.223.223 BDR:10.1.1.1 Number of I/F scoped LSAs is 2

DRElection: 5 times, DelayedLSAck: 523 times

Neighbor Count = 1, Adjacent Neighbor Count= 1

Neighbor:

10.1.1.1 (BDR)

Statistics of interface ethe 1/1/3:

Type tx rx tx-byte rx-byte

Unknown 0 0 0 0

Hello 3149 3138 1259284 1255352

DbDesc 7 6 416 288

LSReq 2 2 80 152

LSUpdate 1508 530 109508 39036

LSAck 526 1398 19036 54568

Advertising