Brocade Communications Systems Layer 3 Routing Configuration ICX 6650 User Manual
Page 149
Brocade ICX 6650 Layer 3 Routing Configuration Guide
131
53-1002603-01
Displaying IP configuration information and statistics
total
The total number of ICMP messages sent or received by the device.
errors
This information is used by Brocade customer support.
unreachable
The number of Destination Unreachable messages sent or received by the device.
time exceed
The number of Time Exceeded messages sent or received by the device.
parameter
The number of Parameter Problem messages sent or received by the device.
source quench
The number of Source Quench messages sent or received by the device.
redirect
The number of Redirect messages sent or received by the device.
echo
The number of Echo messages sent or received by the device.
echo reply
The number of Echo Reply messages sent or received by the device.
timestamp
The number of Timestamp messages sent or received by the device.
timestamp reply
The number of Timestamp Reply messages sent or received by the device.
addr mask
The number of Address Mask Request messages sent or received by the device.
addr mask reply
The number of Address Mask Replies messages sent or received by the device.
irdp advertisement The number of ICMP Router Discovery Protocol (IRDP) Advertisement messages sent or
received by the device.
irdp solicitation
The number of IRDP Solicitation messages sent or received by the device.
UDP statistics
received
The number of UDP packets received by the device.
sent
The number of UDP packets sent by the device.
no port
The number of UDP packets dropped because the packet did not contain a valid UDP port
number.
input errors
This information is used by Brocade customer support.
TCP statistics
The TCP statistics are derived from RFC 793, “Transmission Control Protocol”.
current active tcbs
The number of TCP Control Blocks (TCBs) that are currently active.
tcbs allocated
The number of TCBs that have been allocated.
tcbs freed
The number of TCBs that have been freed.
tcbs protected
This information is used by Brocade customer support.
active opens
The number of TCP connections opened by this device by sending a TCP SYN to another
device.
passive opens
The number of TCP connections opened by this device in response to connection requests
(TCP SYNs) received from other devices.
failed attempts
This information is used by Brocade customer support.
active resets
The number of TCP connections this device reset by sending a TCP RESET message to the
device at the other end of the connection.
passive resets
The number of TCP connections this device reset because the device at the other end of the
connection sent a TCP RESET message.
input errors
This information is used by Brocade customer support.
TABLE 25
CLI display of IP traffic statistics – Layer 2 Switch (Continued)
Field
Description