Brocade Communications Systems Layer 3 Routing Configuration ICX 6650 - Manual (Page 173)

Brocade ICX 6650 Layer 3 Routing Configuration Guide 155
53-1002603-01
Displaying CPU utilization statistics
When you specify how many seconds’ worth of statistics you want to display, the software selects
the sample that most closely matches the number of seconds you specified. In this example,
statistics are requested for the previous two seconds. The closest sample available is for the
previous 1 second and 80 milliseconds.
Syntax: show process cpu [num]
The num parameter specifies the number of seconds and can be from 1 through 900. If you use
this parameter, the command lists the usage statistics only for the specified number of seconds. If
you do not use this parameter, the command lists the usage statistics for the previous five-second,
one-minute, five-minute, and fifteen-minute intervals.