Displaying summary route information – Brocade Communications Systems Layer 3 Routing Configuration ICX 6650 User Manual

Page 397

Advertising
background image

Brocade ICX 6650 Layer 3 Routing Configuration Guide

379

53-1002603-01

Displaying BGP4 information

Syntax: show ip bgp peer-group [peer-group-name]

Only the parameters that have values different from their defaults are listed.

Displaying summary route information

To display summary statistics for all the routes in the Layer 3 switch BGP4 route table, enter a
command such as the following at any level of the CLI.

Syntax: show ip bgp routes summary

Table 68

lists the field definitions for the command output.

TABLE 68

BGP4 summary route information

Field

Description

Total number of BGP routes (NLRIs)
Installed

The number of BGP4 routes the Layer 3 switch has installed in the BGP4
route table.

Distinct BGP destination networks

The number of destination networks the installed routes represent. The
BGP4 route table can have multiple routes to the same network.

Filtered BGP routes for soft reconfig

The number of route updates received from soft-reconfigured neighbors or
peer groups that have been filtered out but retained. For information
about soft reconfiguration, refer to

“Using soft reconfiguration”

on

page 391.

Routes originated by this router

The number of routes in the BGP4 route table that this Layer 3 switch
originated.

Routes selected as BEST routes

The number of routes in the BGP4 route table that this Layer 3 switch has
selected as the best routes to the destinations.

BEST routes not installed in IP
forwarding table

The number of BGP4 routes that are the best BGP4 routes to their
destinations but were not installed in the IP route table because the Layer
3 switch received better routes from other sources (such as OSPF, RIP, or
static IP routes).

Unreachable routes (no IGP route for
NEXTHOP)

The number of routes in the BGP4 route table whose destinations are
unreachable because the next hop is unreachable.

Brocade#show ip bgp peer-group pg1

1 BGP peer-group is pg

Description: peer group abc

SendCommunity: yes

NextHopSelf: yes

DefaultOriginate: yes

Members:

IP Address: 192.168.10.10, AS: 65111

Brocade#show ip bgp routes summary

Total number of BGP routes (NLRIs) Installed

: 20

Distinct BGP destination networks

: 20

Filtered BGP routes for soft reconfig : 100178

Routes originated by this router

: 2

Routes selected as BEST routes

: 19

BEST routes not installed in IP forwarding table : 1

Unreachable routes (no IGP route for NEXTHOP)

: 1

IBGP routes selected as best routes

: 0

EBGP routes selected as best routes

: 17

Advertising