Brocade Communications Systems Layer 3 Routing Configuration ICX 6650 - Manual (Page 298)

280 Brocade ICX 6650 Layer 3 Routing Configuration Guide
53-1002603-01
Displaying OSPF V3 Information
Syntax: show ipv6 ospf virtual-link [brief]
The optional [brief] keyword limits the display to the Transit, Area ID, Router ID, Interface Address,
and State fields for each link.
Changing a key
In this example, the key is changed as illustrated in the two command lines that follow. Note that
the SPI value is changed from 300 to 310 to comply with the requirement that you change the SPI
when you change the key.
Initial configuration command.
Brocade(config-if-e10000-1/1/3)#ipv6 ospf auth ipsec spi 300 esp sha1
no-encrypt 12345678900987655431234567890aabbccddef
Command line for changing the key.
Brocade(config-if-e10000-1/1/3)#ipv6 ospf auth ipsec spi 310 esp sha1
no-encrypt 989898989009876554321234567890aabbccddef