Brocade Communications Systems Layer 3 Routing Configuration ICX 6650 - Manual (Page 22)

4 Brocade ICX 6650 Layer 3 Routing Configuration Guide
53-1002603-01
IP configuration overview
You can use any of the IP addresses you configure on the Layer 3 Switch for Telnet, or SNMP
access.
Layer 2 Switches
You can configure an IP address on a Brocade Layer 2 Switch for management access to the Layer
2 Switch. An IP address is required for Telnet access and SNMP access.
You also can specify the default gateway for forwarding traffic to other subnets.