ACU-RITE MILLPWRG2 - Manual (Page 110)

92 6 Programming
6.2 F
o
lders
6.2 Folders
Folder Functions
The soft keys available are described in the previous chapter, see
"Program Functions soft keys" on page 59.
MILLPWR
G2
offers several versatile features for loading, saving,
deleting, and backing up programs. Programs can be organized by
creating folders. Folders can be quickly selected, created, make a
backup copy, or if necessary, deleted.
Folders
Organize programs by saving them in folders. Folders may be used to
group programs by job, operator, date, customer, or any other method
preferred. Creating folders can only be done in PGM mode.
Creating a Folder
First decide where to place the folder. It can be placed on V:\User
which is the MILLPWR
G2
folder in the console, on a USB device, on a
network, or within sub-folders that have already been created. Use the
following steps to create any type of folder, top level or sub level
folders.
 Press the Program Functions soft key, then press the Folder View
soft key.
 Press the Change Window soft key to select the Folder Tree window.
 Navigate through the folders to place the cursor where the new
folder is to be created by using the ARROW keys.
 To expand a folder use the RIGHT ARROW key. To collapse an
expanded folder, use the LEFT ARROW key.
 Highlight the folder where the new sub-folder is to be placed, and
press the Create Folder soft key.
When the Folder View soft key is activated, it remains
active until it is pressed again to deactivate folder view.