ACU-RITE MILLPWRG2 - Manual (Page 36)

18 1 Introduction
1
.3 Cons
ol
e
Editing Keys
The following keys are available for editing text on the keyboard.
 The Copy key will copy the highlighted text in the text
field.
 The Paste key will paste to the text field text that was
previously highlighted, and copied.
 The Clear key will remove all text in the text field.
 The back space key will delete text in the text field one
character at a time.
Calculator
Numeric Keypad
The numeric keypad on the front of the console resembles a standard
calculator with keys for numbers 0 through 9, four math function
symbols (+, -, x, and ÷), a decimal point, and a positive/negative sign
(+/-).
 The calculator is accessible from nearly any screen or
field. Press the CALC key to access the “stand-alone”
calculator. The math function soft keys are displayed
in the soft key area. Calculations can be entered
directly into a highlighted field.
Using the calculator in an entry field in a dialogue requires
the operator to press the ENTER key to run the calculation.
To move to the next field using the ENTER key requires the
operator to press ENTER a second time.
Anytime data is entered into an entry field in a dialogue
and the value is changed using the +/- key, the operator is
required to press the ENTER key to use the value change.
Moving to the next field using the ENTER key requires the
operator to press ENTER a second time.