ACU-RITE MILLPWRG2 - Manual (Page 187)

ACU-RITE MILLPWR G2 169
8.2 A
dditional Milling F
unctions
Mirror
 The steps being mirrored must precede the Mirror step.
 With Mirror you can create a mirror image of an entire program or a
section of a program.
To program a MIRROR:
 From the PGM screen, press the Program Steps soft key.
 Press the Mirror soft key.
 Enter the first and last steps in the STEP RANGE that you would like
to mirror.
 Enter the X and Y axes coordinates which define the line across
which the step range is mirrored.
 Enter the Z offset.
 Press the USE key.
Other Steps
Other Steps soft key provides additional milling functions available
with the MILLPWR
G2
product.
 From the PGM screen, press the Program Steps soft
key, then press the Other Steps soft key to display
the popup Menu.
With MILLPWR
G2
, you have the ability to engrave letters, numbers
and symbols, along a straight line or on an arc. Choose from a simple,
stick or stencil font. The character height, font and modifier settings
you select will define your engraving’s appearance.
 The tool diameter being used establishes the spacing between
letters.