ACU-RITE MILLPWRG2 - Manual (Page 40)

22 1 Introduction
1
.5 A
c
cessor
ies
Program Display Screen
 From the DRO mode, press the DRO/PGM key, and the
display changes to program mode showing the
currently selected or loaded program.
When Programing a job, the display activates a graphic view of the
program. While the program is running, the operation that is being
performed is graphically shown as well. The VIEW key provides
features to configure the graphic area.
For more information, see "Program Function Screen" on page 55.
1.5 Accessories
Electronic Edge Finder
The Electronic Edge Finder KT 3D enables the ability to teach
positions, find the center point of a circle, or locate datum (work piece
zero) by touching off on the part. Advantage of an electronic edge
finder is that it instantly senses when contact is made with the point
(even if the axis over traveled).