ACU-RITE MILLPWRG2 - Manual (Page 181)

ACU-RITE MILLPWR G2 163
8.2 A
dditional Milling F
unctions
Delete Steps
MILLPWR
G2
provides options for deleting steps in two ways: using
the Delete Steps soft key or using the CLEAR key.
When deleting single steps, highlight the step, then press the CLEAR
key.
When deleting a range of steps, the Delete Steps feature is usually
the best option.
To delete a group of steps from a program:
 From the PGM screen, press the Step Functions soft key.
 Press the Delete Steps soft key.
 In the STEP RANGE field, enter the first and last step numbers to be
deleted.
 Press the USE key.
Copy/Move Steps
Copy/Move operations make it easy for you to duplicate or rearrange
steps within your program. You'll find the MOVE feature especially
useful for editing steps generated from a DXF file.
After you press the Copy/Move Steps soft key, you'll be asked to enter
a step range, then either copy or move the steps and select a location
where to copy or move the steps (i.e. Paste Location).
Press the Move soft key to relocate the steps. Press the Copy soft key
to create an identical copy of the steps you've chosen (the original
steps will remain in place). After you press the USE key, the new steps
will be inserted into your program.
To copy or move steps:
From the PGM screen, highlight a step where you would like to add or
insert the step(s) that you want to move or copy. If you are already in
Copy/Move Steps then press Paste Location and scroll in the program
where you want to move or copy the steps.
 Press the Step Functions soft key.
 Enter the first and last step numbers that you would like to move or
copy.
 Press the Copy/move Steps soft key.
 Press either the Move Or Copy soft key. Make sure the desired
location is selected in the program or, use Paste Location to select
where to move or copy the steps.
 Press the USE key.