ACU-RITE MILLPWRG2 - Manual (Page 75)

ACU-RITE MILLPWR G2 57
5.1 Pr
ogr
a
mming Intr
oduction
Program Screen Display
When programming a machining step, the display changes according
to the machining step selected. Once a machining step has been
selected using the Program Steps soft key, the display will appear as
shown here. The program steps display windows are described in the
following table.
1 Current program steps.
2 Dialogue for a new milling step (e.g. CIRCLE POCKET)
3 Dialogue field graphic assistant. Graphic changes per input field
illustrating information required.
4 Soft keys.
5 Program name. If an asterisk appears at the end of the name, it is
indicating that the program has not been saved since its last edit.
Soft keys that have a small arrow in the lower right hand
corner indicates that additional soft keys are available
when the key is selected. Soft keys that have up arrow in
the top left hand corner indicates that a popup menu is
available when selected.