ACU-RITE MILLPWRG2 - Manual (Page 29)

ACU-RITE MILLPWR G2 11
1
.3 Console
1.3 Console
Operating Console
The ACU-RITE MILLPWR
G2
Console has a 12.1-inch Flat-Panel Color
Screen Display. The following list of items are located on the front
panel.
See "DRO display screen" on page 21 for mapping information of the
start up screen.
See "Console Keypad" on page 20 for a full description of the console
keypad layout. The individual keys are fully described on page ii of the
inside front cover.
The following features are located on the front panel of the console:
See "Calculator" on page 18 for a full description of the calculator
keypad.
Rear Panel
The ACU-RITE MILLPWR
G2
DRO rear panel has the following list of
items located on the panel.
1 Color flat panel screen display.
2 Emergency “E” Stop
3 Soft keys
4 Power On indicator light / Error indicator light
5 Potentiometer for feed rate override
6 Go, Pause/Stop, Navigation keys, and Move Table keys
7 Axis keys
8 Console keypad
9 USB Port
1 Power switch
2 Power connector
3 Servo Power connector
4 Earth (ground) terminal
5 Ethernet port
6 USB port
7 KT 130 Edge Finder
8 Pendant (Remote switch)
9 RS-232-C connector
10 Auxiliary Machine Interface (AMI); for future expansion.
11 Servo connector (X, Y, and Z)
12 Grounding Edger Finder
13 Encoder Inputs (W and Z axis)