ACU-RITE MILLPWRG2 - Manual (Page 35)

ACU-RITE MILLPWR G2 17
1
.3 Console
Keyboard
An on screen QWERTY keyboard will automatically popup when you
enter a field that requires text information input.
 The keyboard becomes visible (popup) when text, and numerical
information is required for an action (e.g. saving a program, or
entering text for engraving).
 Use the ARROW keys for navigation of the cursor to go to the desired
character and press ENTER to select the character.
 When the information has been entered using the keyboard, press
the Save soft key. The keyboard will disappear from the screen. The
keyboard will also be removed from the screen when the CANCEL key
is pressed.
 When using a USB keyboard, the on screen keyboard can be
disabled by pressing the Keyboard soft key. The on screen keyboard
will remain disabled untill it is enabled by pressing the Keyboard soft
key again. When the console goes through a power cycle, the key
board will retain its setting prior to the power cycle.
Special Characters
The keyboard also provides a “Special Characters” display which is
accessed by the “(#*\!...” key.
 Arrow over to the “(#*\!...” key to highlight the key, and press the
the ENTER key.
Navigational Soft keys
The following navigational soft keys are always available on the
keyboard.
 The “Up Arrow” key switches the keyboard from
upper to lower case letter mode, or from lower to
upper case letter mode depending on the current
keyboard mode.
 The “Abc” key switches the keyboard from the
special character key mode to the alpha numeric key
mode.
 The “(#*\!...” key switches the keyboard from the
alpha numeric key mode to the special character key
mode.