ACU-RITE MILLPWRG2 - Manual (Page 73)

ACU-RITE MILLPWR G2 55
5.1 Pr
ogr
a
mming Intr
oduction
Program Function Screen
The Program Function screen displays several windows, and soft keys
which are defined in the contents of this chapter. The display area
window is briefly described in the following table. The Program
Functions
soft key provides access to Network or USB memory
devices by pressing the Folder View soft key. The features of this soft
key are explained on the following page.
 Press the Program Functions soft key to access
programs stored in the Console, on a Network, USB
memory devices, or to create a new program.
The Program Functions screen displays all programs that are stored in
a selected folder. The default storage folder for the console is v:\user\.
General Information and the programming steps of the highlighted
program are displayed in the lower left window [3], for a quick access
review. If a program has ran in its entirety (without errors), graphic
preview [2] is also displayed.
Folder View
The Folder View soft key includes additional access to the user. The
Folders Tree [9]is displayed which allows the user to access different
folders, and narrow a search to selected program types.
Access to Network or USB memory devices is available in the Folders
Tree.
 The Folder View soft key stays active until it is pressed again.
The MILLPWR
G2
can save programs to a USB device, or to network
drive (e. g. a PC) as well as to the MILLPWR
G2
User folder.
To return to the Program Display Mode:
1 Available soft keys.
2 Program graphic preview.
3 Program steps preview.
4 Current folder selected.
5 Constant status bar.
6 List of all the programs stored in the current location (or folder).
7 Displays the current program loaded.
8 Shows the type of programs being displayed (e.g. MILLPWR G2 ,
or G-Code programs to be displayed; or DXF files.
9 The Folders Tree can be used when connected to a network, USB
memory devices, or folder management.
The internal memory of the MILLPWR
G2
is organized into
a folder structure. The default folder is the User folder.
Programs can be stored in the User folder. Additional
folders can be created to better organize programs.
Features in Program Functions allow for navigation of all
folders, USB memory devices and network folders.