ACU-RITE MILLPWRG2 - Manual (Page 31)

ACU-RITE MILLPWR G2 13
1
.3 Console
Dialogues, and Drop Down Menus
This manual provides complete information where specific examples
of actions are being explained.
As a general overview of the dialogues provided by the MILLPWR G2 ,
several fields are likely to be provided for input. To navigate a dialogue,
use the ARROW keys to select the desired field. After entering the data
into a field, press either the ENTER key, or the UP or DOWN ARROW keys to
move to the next field. Exiting a field with one of these key methods
will retain the entered data in that field.
When the required data has been entered, press the USE key to accept
the data entered for use in that specific function.
Most dialogues contain Drop Down menus. Specific milling functions
may require additional information. The choices available are provided
in a drop down menu. In most cases, they are also provided as soft
keys. The choices can be selected from either location.
Operator Prompts
For actions that require immediate input to continue the operation an
operator prompt will be displayed by the MILLPWR
G2 in the message
bar. The required data can be entered with the numerical keypad, and
in some instances using the alphanumeric on screen keyboard.
Cursor
The MILLPWR
G2
uses a highlighted cursor to mark a field for selection
or editing. In some instances, the cursor will default to a field without
highlighting the field. Use the ARROWS keys to move the cursor. The UP,
and DOWN ARROWS move the cursor through the fields available. The
RIGHT
ARROW will open a field that contains more choices, or subfolders
in the folder tree. The LEFT ARROW will close the menu, or subfolders.
The cursor will also change from a highlighted bar to a text cursor
when a field selected is having data entered.