Rockwell Automation 20G PowerFlex 750-Series AC Drives - Manual (Page 311)

Rockwell Automation Publication 750-RM002B-EN-P - September 2013 311
Integrated Motion on the EtherNet/IP Network Applications for PowerFlex 755 AC Drives Chapter 6
7. Open the Axis Properties for the feedback axis (Dual_Loop_Axis).
8. From the Feedback Configuration pull-down menu, choose Dual
Feedback to allow the axis object to accept feedback from two sources.
9. Select the Motor Feedback category.
10. From the Type pull-down menu, choose the appropriate motor feedback.
11. In the Cycle Resolution box, type the appropriate value for your device.
12. From the Startup Method pull-down menu, choose the appropriate value
for your device.