Rockwell Automation 1734-IT2I Thermocouple and RTD Input Module User Manual - Manual (Page 11)

1 Publication 1734-UM004F-EN-E - December 2012
Chapter
1
About POINT I/O Modules
Overview Read this chapter to familiarize yourself with configurable features on the
1734-IT2I, 1734-IR2, and 1734-IR2E modules. The following table lists where
to find specific information in this chapter.
Module Features The module features include:
Input type
• Sensor type
• Data formats
• Preset temperature selection
• Fault mode
• Overrange alarms
• Underrange alarms
• Fault alarms
You must use your programming software, like Rockwell Automation
RSNetWorx, to configure these features. See this chapter for a brief
description of each module feature. Use the online help included with your
programming software to perform specific configuration. You can find the
EDS files for this module at
www.ab.com/networks/eds/ .
Topic Page
Module Features 1
Selecting a Module Input Type 2
Communicating with Your Module 2
Use Module Alarms 5
Cold Junction Compensation (1734-IT2I module) 6
Chapter Summary 6