Rockwell Automation 1734-IT2I Thermocouple and RTD Input Module User Manual - Manual (Page 9)

ix Publication 1734-UM004F-EN-E - December 2012
Preface
Read this preface to familiarize yourself with the rest of the manual. It provides
information concerning:
• who should use this manual
• the purpose of this manual
• related documentation
• conventions used in this manual
Who Should Use this
Manual You must be able to use your selected configuration software to set up and
calibrate these modules. You must have the capability to download and use
files.
We assume you know how to do this in this manual. If you do not, refer to
your software user manuals or online help before attempting to use these
modules.
Purpose of this Manual This manual describes how to install, configure and troubleshoot your
Thermocouple and Resistance Termperature Detector (RTD) modules.
Related Documentation
The following documents contain additional information concerning Rockwell
Automation products. To obtain a copy, contact your local
Rockwell Automation office or distributor.
For Information About See
About POINT I/O Modules Chapter 1
Install the Module Chapter 2
Configure Your Module Chapter 3
Calibrate Your Module Chapter 4
Troubleshoot the Module Chapter 5
Configure Modules in RSLogix 5000 Software Appendix A
Calculate Absolute Accuracy and Accuracy Drift Appendix B
Resource Description
POINT I/O RTD and Thermocouple Input Module
Installation Instructions, publication
1734-IN011
Information about specification and safety approval concerning 1734-IT2I,
1734-IR2, and 1734-IR2E modules.
Analog Input Modules Installation Instructions,
publication
1734-IN024
Information about how to install the 1734-IE2C, Series C, POINT I/O Current
Input Analog Module, 1734-IE2V, Series C, POINT I/O Voltage Input Analog
Module, and POINT I/O 2 Current and 2 Voltage Input Analog Module.