Rockwell Automation 1734-IT2I Thermocouple and RTD Input Module User Manual - Manual (Page 47)

Publication 1734-UM004F-EN-E - December 2012
Configure Your Module 37
1734-IR2 and 1734-IR2E modules
Chapter Summary This chapter explained how to configure the modules. The next chapter walks
you through how to calibrate your POINT I/O Thermocouple and RTD
Modules.
3. Click View File to
view the actual
EDS file (shown).
2. Click the EDS File tab to display
the statistics of the EDS file used
to configure this module.
1. Click the I/O Defaults tab to display
the default characteristics for this
module.
This dialog shows the
input/output defaults for the
four modes:
Strobe
Polled
Change of state and
Cyclic