Rockwell Automation 1734-IT2I Thermocouple and RTD Input Module User Manual - Manual (Page 21)

Publication 1734-UM004F-EN-E - December 2012
Install the Module 11
1734-RTD - Position 6
1734-IT2I - Position 6
2. Make certain the DIN rail locking screw is in the horizontal position,
noting that you cannot insert the module if the locking mechanism is
unlocked.
4 5
6
7 8
1
2
3
Turn the keyswitch to align
the number with the notch.
Notch
(position 6 shown)
Make sure the DIN rail locking
screw is in the horizontal position.