Configure hmi interface board ip settings – Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality User Manual
Page 12
Advertising
10
Rockwell Automation Publication 7000-UM201B-EN-P - June 2013
Chapter 1
Quick Start - “Out of the Box”
Configure HMI Interface Board IP Settings
1.
Select the desired module IP address from the list.
2.
Click Change IP Settings (
).
Figure 3 - Configure HMI Interface Board IP Settings
The MAC ID of the HMI Interface Board module will be displayed in the
Title Bar of the dialog to identify the module that is being changed.
3.
To enter a Static IP configuration, enter the data in all three fields and click
Apply (
).
To enter a Dynamic IP configuration, click Make Dynamic.
Figure 4 - IP Setup
MAC ID
Advertising