Configure plc link – Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality User Manual
Page 47
Advertising
Rockwell Automation Publication 7000-UM201B-EN-P - June 2013
45
Drive Terminal Application
Chapter 4
Configure PLC Link
The PLC Setup Screen (
) shows the parameter links which are assigned
to PLC Input and PLC Output links.
Toggle between ‘Inputs’ and ‘Outputs’ by pressing the respective button on the
right side of the screen.
Assign a Parameter to an Analog Output Port
1.
Select the desired link from the left column (
).
2.
Press the Parameter column header.
Alternatively, press the Search button (see
Figure 41 - PLC Link Setup
Advertising