Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 31)

Rockwell Automation Publication 7000-UM201B-EN-P - June 2013 29
Chapter
4
Drive Terminal Application
Overview The Drive Terminal for the PowerFlex 7000 Medium Voltage Drive is a software
application which can be run on many Windows based systems. The
communication to the PowerFlex 7000 drive is via Ethernet. The application is
optimized using 640x480 screen resolution.
Requirements
The application will run on the following operating systems provided that the
host hardware contains a minimum of .Net Framework 2.0 or .Net Compact
Framework 2.0.
• Windows XP
• Windows Vista
• Windows 7
• Windows CE 6
Chapter Objectives This chapter describes how the Drive Terminal application modifies and obtains
information within the drive. In this chapter you will learn how to:
• Configure information associated with the initial drive setup.
• Monitor:
–
Drive parameters
– Drive Status
• View and Reset Alarm conditions.
• Perform Diagnostic Trending
This chapter deals only with the operation of the terminal application. Specific
references to any particular parameter are only for illustrative purposes. Refer to
Publication 7000-TD002__-EN-P for information about actual parameters
within a given firmware release.