Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 46)

44 Rockwell Automation Publication 7000-UM201B-EN-P - June 2013
Chapter 4 Drive Terminal Application
Configure Analog Ports
The Analog Setup screen, typical of Figure 40 , shows all analog output ports of
the drive to which a parameter can be assigned.
Assign a Parameter to an Analog Output Port
1. Select the desired port from the Output column.
2. Press the Parameter column header.
Alternatively, press the Search button (see Search for Parameter on
page 34 ).
Some of the analog outputs also contain a ‘Scaling’ parameter which is associated
with the output.
Pressing the ‘Scaling’ column header will provide a Value Parameter dialog to edit
the associated scaling parameter.
Figure 40 - Analog Port Setup