Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 13)

Rockwell Automation Publication 7000-UM201B-EN-P - June 2013 11
Quick Start - “Out of the Box” Chapter 1
When the dialog closes and returns to the main application ( Figure 2 ), the
application searches for all available HMI Interface Boards on the same network
as the terminal.
Configure Terminal IP Settings
1. Click Change IP Settings ( Figure 5 ) to launch Network Connections
( Figure 6 ).
Figure 5 - Configure Terminal IP Settings
2. Double-click “PCI-KS88411” to open the Settings dialog.
Figure 6 - Network Connections
TIP If you are configuring both the terminal and the HMI Interface Board to a
different network, the HMI Interface Board may no longer appear in the list
until the terminal has also been re-configured.