Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 48)

46 Rockwell Automation Publication 7000-UM201B-EN-P - June 2013
Chapter 4 Drive Terminal Application
Configure XIO
The XIO configuration screen ( Figure 42 ) provides two XIO functions. The left
pane is used to assign functional group of I/O to a particular card number. The
right pane is used to assign a selectable function to the outputs of the
Standard I/O card.
Figure 42 - XIO Configuration Setup
Assign an XIO Card
1. Select the ‘Function’ from the list in the left panel.
2. Press the ‘Location’ column header to open an Enum Parameter dialog.
Figure 43 - Enum Parameter Dialog
3. Open the pulldown menu and select a New Value.
4. Press OK.
Assign a Configurable Function to the Outputs on the Standard XIO Card
1. Select an ‘Output’ from the right panel.
2. Press the ‘Assignment’ column header to open an Enum Parameter dialog.
3. Open the pulldown menu and select a New Value.
4. Press OK.