Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 79)

Rockwell Automation Publication 7000-UM201B-EN-P - June 2013 77
PanelView Plus 6 Terminal Chapter 7
3. Click PCI-KS88411 (note the name could be different).
If you are required to use a static IP Address, then set the radio button to
Specify an IP Address (
Figure 76 ).
Figure 76 - IP Address Settings
The specific IP Address, Subnet Mask and Default Gateway that you use will
depend on your network. Consult with your network administrator.
The configuration shown in Figure 76 will work for a PowerFlex 7000 Medium
Voltage Drive where the terminal is connected directly to the HMI Interface
Board with no DHCP Server involved.
Obtain Terminal Patch from HMI Interface Board
The PanelView Plus 6 terminal requires a patch to properly display color push
buttons and the Chinese language. This patch is available on the PowerFlex 7000
Medium Voltage Drive HMI Interface Board.
To obtain the patch:
1. Open an instance of Internet Explorer (see Windows Explorer Tutorial on
page 67 ).
2. Type “http://<ip_address>” in the address bar, where <ip_address> is the
IP Address of the HMI Interface Board module.\
In a network with no DHCP Server and where the module has not been
configured with a static IP address, the HMI Interface Board’s IP Address
is 169.254.0.10. The webpage typical of
Figure 77 will be shown.