Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 42)

40 Rockwell Automation Publication 7000-UM201B-EN-P - June 2013
Chapter 4 Drive Terminal Application
Alarms In the PowerFlex 7000, “Alarms” refer collectively to ‘Faults’ and ‘Warnings’. The
Alarms screen, typical of
Figure 36 , provides two tabs to independently show the
Warnings or the Faults.
Figure 36 - Alarm Screen
Select the desired queue by selecting the tab. The operation of both queues is
identical.
The queue contains three columns:
• The name of the alarm,
• A code associated with the alarm
• Timestamp
TIP The Alarm Screen Common Panel shows a timestamp for the last time the drive
was started and stopped for any reason.