File transfer client – Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality User Manual
Page 81
Rockwell Automation Publication 7000-UM201B-EN-P - June 2013
79
PanelView Plus 6 Terminal
Chapter 7
File Transfer Client
An FTP client has been written specifically for use by the CE Terminal and is
obtainable from the PowerFlex 7000 Medium Voltage Drive HMI Interface
Board.
To Transfer a File or directory using an FTP Client
1.
Select the appropriate application from the Forge Shell toolbox (see
).
The left pane is the directory structure of the storage device(s) in the
terminal. The right pane is the directory structure of the drive.
2.
Select the source in the desired tree structure.
3.
Press the Source button.
4.
Select the destination in the opposite pane.
5.
Press the Destination button.
6.
Press the Transfer button once the source and destination has been
selected.
Figure 78 - FTP Client