Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 39)

Rockwell Automation Publication 7000-UM201B-EN-P - June 2013 37
Drive Terminal Application Chapter 4
The column headers of the right pane are “Parameter Name”, “Value” and “Units”.
Clicking on the Value header displays a dialog which provides additional
information for the selected parameter as well as modification of the parameter.
Clicking on the Parameter name header will sort the list based on:
• normal drive arrangement (element number within group)
• alphabetically
• parameter access level (sort on a secondary alpha key)
Editing & Viewing Parameters
When viewing a parameter, the dialog used will be dependant on the type of the
parameter, i.e. Value, Binary or Enum.
Value Parameter
The dialog used for a value type of parameter, typical of Figure 32 , displays the
following attributes about the parameter:
• Default Value
• Minimum Value
• Maximum Value
• Units
• Parameter Number and Name
• Current Value
To change the value:
1. Select the New Value field.
2. Enter the new value into the field.
3. Press ‘Apply’ or ‘OK’.
The Cancel button exits the dialog without applying changes.
The Default button places the default value into the ‘New Value’ field.
Figure 32 - Edit Value Parameter